COMPANY
News
HOME > COMPANY > News
Electronic products and safety accessories CCC certified safety critical components and materials list updated!
Date：2022/9/28 Clicks：586
Compulsory product certification (CCC certification) based on GB 4943.1-2022 "Audio Video, Information Technology and Communication Technology Equipment Part 1: Safety Requirements" has been released on July 19, 2022, and will be released on August 1, 2023. Implement and replace GB 4943.1-2011 and GB 8898-2011.
In order to meet the requirements of changes in standards, the list of safety-critical components and materials for electronic products and safety accessories in the CCC certification catalogue is now updated and released (see the annex for details), as the type test report for the implementation of CCC certification according to GB 4943. Factory consistency check basis.
1. The above standards are automatically applied to their current valid versions. In case of special circumstances, CNCA will specify them separately;
2. If the above key components are integrated in other components and cannot be separated, the other components should meet the relevant requirements of the key components and be listed as key components. For example, if the optocoupler for primary isolation is integrated in the IC, then IC is the key piece).
3. If the whole machine contains products or components in the CCC catalog that are not listed in the above table, the relevant information should be supplemented and assessed according to Class B key components;
4. The serial number 19* only adopts the requirements of the relevant safety performance part in GB/T 15288.
5. If the above-mentioned safety-critical components are non-standard components, they should be included in the list and controlled according to applicable standards.
In order to meet the requirements of changes in standards, the list of safety-critical components and materials for electronic products and safety accessories in the CCC certification catalogue is now updated and released (see the annex for details), as the type test report for the implementation of CCC certification according to GB 4943. Factory consistency check basis.
CNCA TC03 Technical Expert Group
September 23, 2022
illustrate:
1. The above standards are automatically applied to their current valid versions. In case of special circumstances, CNCA will specify them separately;
2. If the above key components are integrated in other components and cannot be separated, the other components should meet the relevant requirements of the key components and be listed as key components. For example, if the optocoupler for primary isolation is integrated in the IC, then IC is the key piece).
3. If the whole machine contains products or components in the CCC catalog that are not listed in the above table, the relevant information should be supplemented and assessed according to Class B key components;
4. The serial number 19* only adopts the requirements of the relevant safety performance part in GB/T 15288.
5. If the above-mentioned safety-critical components are non-standard components, they should be included in the list and controlled according to applicable standards.
Add.：Room703、705/7F, Development Building, Tian An Hi-Teck Ecological Park, No.555 North Road Panyu Avenue, Panyu District, Guangzhou City, 511400, China
Tel.：020 - 39211670 Fax：020 - 39211640 E-mail:info@certitek.cn