COMPANY
News
HOME > COMPANY > News
CCC certification for building safety glass
Date：2021/7/30 Clicks：834
Tempered glass belongs to architectural products, and is often used in the exterior walls of floors, elevators, and guardrails. The sales of tempered glass in the domestic market must obtain a CCC certificate to sell. Tempered glass is in the scope of CCC certification. Products that belong to category 21 (formerly category 13). As long as the products included in the mandatory new product range have not obtained or have the 3C certification mark, they shall not leave the factory or be used in public places. Violators will face huge fines!
Safety glass CCC certification unit division
In principle, the division of the certification unit is based on the type, thickness, structure, transmittance, sealing method and material of the certified product. The same products produced by the same manufacturer at different processing sites are regarded as different units. The certification client submits certification commission based on the unit division plan.
Testing standard
GB/T11944 "Insulating Glass"
GB15763.2 "Safety Glass for Building Part 2: Tempered Glass"
GB15763.3 "Safety Glass for Building Part 3: Laminated Glass"
GB/T29551 "Solar photovoltaic laminated glass for buildings"
Authentication mode
Type test + initial factory inspection + supervision after certification
Certification process
The certification process includes: certification commission, acceptance and data review, charging, plan planning, type testing and initial factory inspection, certification result evaluation and approval, certification decision issuance, and certification acceptance supervision.
Application materials
·Formal application
·Safety glass product technical parameter table
·Factory inspection questionnaire
·Measuring certificate of necessary testing equipment, subcontract agreement for inspection process (when needed)
·List of qualified suppliers of key raw materials
·Relevant agreements or contracts signed between certification clients, producers, and manufacturers
Main test items
·Insulating glass: dew point, resistance to ultraviolet radiation, water and gas seal durability
·Toughened glass: fragment state, impact resistance, shot bag impact
·Laminated glass: impact resistance, shotbag impact resistance, heat resistance, moisture resistance, radiation resistance
·Photovoltaic laminated glass: impact resistance, shot bag impact resistance, heat resistance
Certificate information
Generally 2 months (Note: rectification time for unqualified product test is not included)
Certificate validity period
The certificate is valid for five years
Tempered glass is a kind of architectural safety glass, and architectural safety glass also includes the following glass types:
Safety glass CCC certification unit division
In principle, the division of the certification unit is based on the type, thickness, structure, transmittance, sealing method and material of the certified product. The same products produced by the same manufacturer at different processing sites are regarded as different units. The certification client submits certification commission based on the unit division plan.
Testing standard
GB/T11944 "Insulating Glass"
GB15763.2 "Safety Glass for Building Part 2: Tempered Glass"
GB15763.3 "Safety Glass for Building Part 3: Laminated Glass"
GB/T29551 "Solar photovoltaic laminated glass for buildings"
Authentication mode
Type test + initial factory inspection + supervision after certification
Certification process
The certification process includes: certification commission, acceptance and data review, charging, plan planning, type testing and initial factory inspection, certification result evaluation and approval, certification decision issuance, and certification acceptance supervision.
Application materials
·Formal application
·Safety glass product technical parameter table
·Factory inspection questionnaire
·Measuring certificate of necessary testing equipment, subcontract agreement for inspection process (when needed)
·List of qualified suppliers of key raw materials
·Relevant agreements or contracts signed between certification clients, producers, and manufacturers
Main test items
·Insulating glass: dew point, resistance to ultraviolet radiation, water and gas seal durability
·Toughened glass: fragment state, impact resistance, shot bag impact
·Laminated glass: impact resistance, shotbag impact resistance, heat resistance, moisture resistance, radiation resistance
·Photovoltaic laminated glass: impact resistance, shot bag impact resistance, heat resistance
Certificate information
Certification cycle
Generally 2 months (Note: rectification time for unqualified product test is not included)
Certificate validity period
The certificate is valid for five years
Add.：Room703、705/7F, Development Building, Tian An Hi-Teck Ecological Park, No.555 North Road Panyu Avenue, Panyu District, Guangzhou City, 511400, China
Tel.：020 - 39211670 Fax：020 - 39211640 E-mail:info@certitek.cn